Piston Specifications 2011 Dodge Challenger 5.7L V8

Question

What are the precise piston specifications for the 2011 Dodge Challenger. I need to order parts so I need a detailed description of its precise requirements.

Edit: Piston specs needed for 2011 Dodge Challenger 5.7L V8 engine.

in progress 0
Jeffrey Petree 2 years 2021-02-07T03:37:09+00:00 1 Answer 73 views Beginner 0

Answer ( 1 )

  1. Matthew Moore
    0
    2021-02-07T03:38:52+00:00
    Reply

    To provide you with a description identifying pistons precisely you need to define what Dodge Challenger engine you have. Do you parameters of just the pistons? What about the piston rings or piston pins?

    These are the piston specifications as outlined by the 2011 Dodge Challenger 5.7-liter 8-cylinder 348 CID factory service manual.

    Piston Specifications

    DESCRIPTION METRIC STANDARD
    Clearance Measured at 38.0 mm (1.5 in.) Below Deck 0.031 – 0.058 mm 0.012 – 0.023 in.
    Ring Groove Diameter
    Top Groove
    Second Groove    		 –
    90.4 – 90.6 mm
    88.4 – 88.7 mm    		 –
    3.56 – 3.57 in.
    3.48 – 3.49 in.
    Weight 413 grams 14.56 oz.
    Piston Length 53.3 mm 2.10 in.
    Ring Groove Width
    No. 1
    No. 2
    No. 3    		 –
    1.23 – 1.26 mm
    1.23 – 1.25 mm
    2.03 – 2.05 mm    		 –
    0.048 – 0.0496 in.
    0.048 – 0.0492 in.
    0.079 – 0.080 in.

    Piston Pins Specifications

    DESCRIPTION METRIC STANDARD
    Clearance In Piston 0.005 – 0.014 mm 0.0001 – 0.0005 in.
    Diameter 24.004 – 24.007 mm 0.945 – 0.9451 in.
    Length 62.99 – 63.21 mm 2.47 – 2.48 in.

    Piston Rings Specifications

    DESCRIPTION METRIC STANDARD
    Ring Gap
    Top Compression Ring
    Second Compression Ring
    Oil Control Rails    		 –
    0.40 – 0.55 mm
    0.24 – 0.51 mm
    0.15 – 0.66 mm    		 –
    0.015 – 0.021 in.
    0.009 – 0.020 in.
    0.0059 – 0.0259 in.
    Side Clearance
    Top Compression Ring
    Second Compression Ring
    Oil Control Rails    		 –
    0.04 – 0.09 mm
    0.04 -.08 mm
    0.06 – 0.21 mm    		 –
    0.001 – 0.0035 in.
    0.001 – 0.0031 in.
    0.002 – 0.008 in.
    Ring Width
    Top Compression Ring
    Second Compression Ring
    Oil Control Rails    		 –
    1.17 – 1.19 mm
    1.17 – 1.19 mm
    0.387 – 0.413 mm    		 –
    0.0460 – 0.0468 in.
    0.0460 – 0.0468 in.
    0.015 – 0.016 in.

Leave an answer